Departments
UT-193, 1-15/16"- 2-3/16", Stainless Steel, T-Bolt Clamp, 304, Banded Clamps, Zinc Plated Nut Prevents Corrosion & Seizing, 4 Spot Welds On Each End Of The Clamp For Up To 80 LB Of Torque, 1-15/16"-2-3/16" Hose ID Range.
UT-218, 2-3/16"-2-1/2", Stainless Steel, T-Bolt Clamp, 304 Banded Claps, Zinc Plated Nut Prevents Corrosion & Seizing, 4 Spot Welds On Each End Of The Clamp For Up To 80 LB Of Torque, 2-3/16"- 2-1/2" Hose ID Range.
UT-231, 2-5/16"-2-5/8", Stainless Steel, T-Bolt Clamp, 304, Banded Clamps, Zinc Plated Nut Prevents Corrosion & Seizing, 4 Spot Welds On Each End Of The Clamp For Up To 80 LB Of Torque 2-5/16"-2-5/8" Hose ID Range.
2", Part A, Polypropylene Cam & Groove Coupling, Glass Reinforced Polypropylene, No Threading, Tools, Lugs, Twisting, Springs, Ball Bearings Or Snaps.
2", Part E, Polypropylene Cam & Groove Coupling, Glass Reinforced Polypropylene, No Threading, Tools, Lugs, Twisting, Springs, Ball Bearings Or Snaps.
2", Part F, Polypropylene Cam & Groove Coupling, Glass Reinforced Polypropylene, No Threading, Tools, Lugs, Twisting, Springs, Ball Bearings Or Snaps.
2", Full Port, Polypropylene Bolted Ball Valve, Manufactured From Glass Reinforced Polypropylene For Strength & Durability, Will Never Rust Or Corrode, Viton O-Ring, Body Seal EPDM O-Ring, Unique Body To Flange Design Allows For Low Torque On/Off Operation, Self Aligning Ball Rotates Freely Against Teflon Seats, Working Pressure 125 PSI @ 70 Degrees Fahrenheit.
2", Part B, Polypropylene Cam & Groove Coupling, Glass Reinforced Polypropylene, No Threading, Tools, Lugs, Twisting, Springs, Ball Bearings, Or Snaps, Polypropylene With Stainless Steel Handles.
2", Part C, Polypropylene Cam & Groove Coupling, Glass Reinforced Polypropylene, No Threading, Tools, Lugs, Twisting, Springs, Ball Bearings, Or Snaps, Polypropylene With Stainless Steel Handles.
2", Part D, Polypropylene Cam & Groove Coupling, Glass Reinforced Polypropylene, No Threading, Tools, Lugs, Twisting, Springs, Ball Bearings, Or Snaps, Polypropylene With Stainless Steel Handles.
2", Part DC, Polypropylene Cam & Groove Coupling, Glass Reinforced Polypropylene, No Threading, Tools, Lugs, Twisting, Springs, Ball Bearings, Or Snaps, Polypropylene With Stainless Steel Handles.
2", Steel Suction Strainer, Round Hole, Plated Steel, Prevents Pump Damaging Solids From Entering Your Pump, Plated Steel Construction For Rust Resistance.
4 Pack, 2", Short Shank Gasket, EPDM Rubber Gaskets For Female Sipt Pin-Lug Couplings.