Departments
1.33" x 6'6", Studded T-Post, Green With Aluminum Top, Made From Rail Steel, Clips Not Included, Order TV# 154307.
1.33" x 8', Studded T-Post, Green With Aluminum Top, Made From Rail Steel, Clips Not Included, Order TV# 154307.
2" x 100', Blue, PVC Discharge Hose, For Water, Light Chemicals & The Pumping Service In The Agricultural, Rental, Construction, Marine, & Irrigation Industries, Tube & Cover Are PVC, Reinforced With 3 Ply Polyester Yarns, 1 Longitudinal Ply & 2 Spiral Plies, Both Tube & Cover Are Extruded Simultaneously To Obtain Maximum Bonding, Strong, Lightweight Non- Water Absorbing & Mildew-Proof Hose That Rolls Up Flat For Easy Storage, Resistant To Oils, Grease, Many Chemicals & Acids, Thickness 2" ID, Working Pressure 70 LB, Temperature Range -5 Degrees Fahrenheit To 130 Degrees Fahrenheit.
2", Plated Steel, King Nipple, For Use Handling Water & Other Liquids, Plated Steel For Rust Resistance.
2", Female Aluminum Short Shank, For Use With Hoses Handling Water & Other Liquids, Specifications: Female Sipt Threads, Requires A Gasket To Seal.
UT-193, 1-15/16"- 2-3/16", Stainless Steel, T-Bolt Clamp, 304, Banded Clamps, Zinc Plated Nut Prevents Corrosion & Seizing, 4 Spot Welds On Each End Of The Clamp For Up To 80 LB Of Torque, 1-15/16"-2-3/16" Hose ID Range.
UT-218, 2-3/16"-2-1/2", Stainless Steel, T-Bolt Clamp, 304 Banded Claps, Zinc Plated Nut Prevents Corrosion & Seizing, 4 Spot Welds On Each End Of The Clamp For Up To 80 LB Of Torque, 2-3/16"- 2-1/2" Hose ID Range.
UT-231, 2-5/16"-2-5/8", Stainless Steel, T-Bolt Clamp, 304, Banded Clamps, Zinc Plated Nut Prevents Corrosion & Seizing, 4 Spot Welds On Each End Of The Clamp For Up To 80 LB Of Torque 2-5/16"-2-5/8" Hose ID Range.
2", Part A, Polypropylene Cam & Groove Coupling, Glass Reinforced Polypropylene, No Threading, Tools, Lugs, Twisting, Springs, Ball Bearings Or Snaps.
2", Part E, Polypropylene Cam & Groove Coupling, Glass Reinforced Polypropylene, No Threading, Tools, Lugs, Twisting, Springs, Ball Bearings Or Snaps.
2", Part F, Polypropylene Cam & Groove Coupling, Glass Reinforced Polypropylene, No Threading, Tools, Lugs, Twisting, Springs, Ball Bearings Or Snaps.
2", Full Port, Polypropylene Bolted Ball Valve, Manufactured From Glass Reinforced Polypropylene For Strength & Durability, Will Never Rust Or Corrode, Viton O-Ring, Body Seal EPDM O-Ring, Unique Body To Flange Design Allows For Low Torque On/Off Operation, Self Aligning Ball Rotates Freely Against Teflon Seats, Working Pressure 125 PSI @ 70 Degrees Fahrenheit.
2", Part B, Polypropylene Cam & Groove Coupling, Glass Reinforced Polypropylene, No Threading, Tools, Lugs, Twisting, Springs, Ball Bearings, Or Snaps, Polypropylene With Stainless Steel Handles.