Departments
Push Button Switch, Single Pole Single Throw Normally Off, Momentary Contact, Screw Terminal, Recommended Mounting Hole Fits 1/2" Diameter, 6A/125V, Black, Carded.
Heavy Duty Toggle Switch, Double Pole Double Throw, On/Off/On, Screw Terminals, Recommended Mounting Hole Fits 1/2" Diameter, 20A/125V, 1-1/2 HP, Carded.
1/2", 2 Screw, 90 Degree Angle, Clamp Connector, For Armored Cable & Flexible Metal Conduit, Die Cast Zinc, Used To Terminate Either Type AC Armored Cable Or Flexible Metal Conduit To A Knockout In A Dry Location Box Or Enclosure, UL & CSA Approved, UPC Poly Bag.
Liquid Nails, 28 OZ, Heavy Duty Sub-Floor Adhesive, Superior Quality Exterior & Interior Latex Based Adhesive For Sub-Floors & Most Other Common Building Materials, Bonds Wet Or Frozen Lumber & Bridges Gaps Up To 3/8", Suitable For Use With Foam Board, Contains No Solvents That Could Attack Foam, Recommended For Plywood, Wafer Board, Lumber & Treated Lumber, Particleboard & Foam Board, VOC Compliant, Replaces True Value #284-455 For Members In VOC Restricted Areas.
1" Beam Clamp, Malleable Iron, Used To Clamp On A Beam, Girder Or Other Structural Member To Provide A Mounting Base For The Attachment Of Conduit Hangers, Either Directly Or By Means Of Threaded Rod, CSA Approved.
2 Pack, 1-1/4" x 1", Zinc Plated Steel, Reducing Washer, For Use with Rigid/IMC Conduit, Used To Reduce The Size Of A Knockout On Sheet Metal Box, Enclosure Or Cabinet, Secured By A Pair Of Locknuts For Each Knockout, UL & CSA Approved, UPC Polybag.
Brass, Water Pressure Regulator, Keeps Water Pressure At A Safe, Consistent 40-50 LB Of Operational Pressure, Compliant With New Low Lead Requirements.
1/2" Electrical Metallic Tubing Set Screw Type Connector, 90 Degree Angle, Rain Tight & Concrete Tight, Die Cast Zinc, Used To Terminate Electrical Metallic Tubing To An Unthreaded Knockout With A Right Angle Approach In Damp Locations, UL & CSA Approved, UPC Poly Bag.
35 Pack #1, Anti Short Bushing, BX-Flex, Used To Insert The Open End Of Armored Cable Or Flexible Metal Conduit To Protect Conductors From Sharp Edges, (AS1PL).
1-1/2" Clamp Type Connector, Twin Screw, Die Cast Zinc, Used To Terminate Type SE Cable Or Type NN Cable To A Box Or Enclosure, UL & CSA Approved.
2 Pack, 1" x 1/2", Zinc Plated Steel, Reducing Washer, For Use With Rigid/IMC Conduit, UPC Polybag.
1-1/4", One Hole Steel Strap, For Rigid/IMC Conduit, Zinc Plated Steel, 13 Gauge, Snap On Straps Provide Easy Mounting To Support Rigid & IMC Conduit As Required By The NEC, Straps Are Marked With Trade Sizes For Easy Identification.