Departments
5"D, Oil Rubbed Bronze, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, Brass Finish, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, Antique Brass Finish, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, Brushed Pewter Finish, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, White Finish, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
EZSE-P, True Value, EasyCare Ultra Premium Paint/Primer In One, QT, Pure White Pastel Base For Interior Satin Latex Enamel, Low Odor, Lifetime Warranty, VOC Less Than 5 Grams Per Litre.
5"D, White, Blank Up Kit, Screw Holes 2-3/4" Apart, Decorative Piece Used To Cover The Outlet Box After Removal Of An Existing Ceiling Fixture, Uses A Crossbar Lockup, Securing The Blank Up To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Blank Up Canopy & Offset Crossbar & 2 Each Of The Following: 8-32 x 1-1/2" Mounting Screws & Brass Cap Nuts.
3-1/4"D, Brass Finish, Glass Shade Holder, Use To Install A New Light Fixture, 250V Rated, For Use With A Medium Base Bulb, 60W Maximum, Holds A Glass Fitter Shade, Not Included, Which Is Held In Place By Tightening The Fitter Screws, Includes 1 Each Of The Following: Glass Shade Holder With 18 Awg Pre-Wired 6" Insulated Leads, Ground Wire & Insulation, 4" Offset Crossbar & Grounding Screw, 2 Each Of The Following: 8-32 x 1/2" Mounting Screws, 8-32 x 2" Mounting Screws & 3 Each Knurled Screws.
4"D, Brass Finish, Glass Shade Holder, Use To Install A New Light Fixture, 250V Rated, For Use With A Medium Base Bulb, 60W Maximum, Holds A Glass Fitter Shade, Not Included, Which Is Held In Place By Tightening The Fitter Screws, Includes 1 Each Of The Following: Glass Shade Holder With 18 Awg Pre-Wired 6" Insulated Leads, Ground Wire & Insulation, 4" Offset Crossbar & Grounding Screw, 2 Each Of The Following: 8-32 x 1/2" Mounting Screws, 8-32 x 2" Mounting Screws & 3 Each Knurled Screws.
Twin Cluster Ceiling Kit, Used To Install A New Light Fixture, 250V Rated , For Use With 2 Medium Base Bulbs, 50W Maximum, Holds A Glass Diffuser, Not Included, Which Is Held In Place By The Brass Finish Lock Up Cap & Rubber Washers, Includes 1 Each Of The Following: Canopy, 2 Bulb Cluster Socket With 18 Awg Pre-Wired 8" Insulated Leads, 4" Offset Crossbar & Brass Finish Lock Up Cap, 2 Each Of The Following: 8-32 x 1/2" Mounting Screws & 1/8 IP Rubber Washers.
2 Pack, 1/8 IP, Brass Finish, Lock Up Cap, Secures Center Mount Glass Shade To A Ceiling Fixture, Replaces Missing, Worn, Or Outdated Lock Up Caps.
2 Pack, 1/8 IP, Nickel Finish, Lock Up Cap, Secures Center Mount Glass Shade To A Ceiling Fixture, Replaces Missing, Worn, Or Outdated Lock Up Caps.
EZSE-T, True Value, EasyCare Ultra Premium Paint/Primer In One, QT, Tint Base For Interior Satin Latex Enamel, Low Odor, Lifetime Warranty, VOC Less Than 5 Grams Per Litre.
1/8 IP, Brass Finish, Lock Up Kit, Secures A Center Mount Glass Shade To A Ceiling Fixture, Include 1 Each Of The Following: 1-1/8" Check Ring, 1/8 IP Lock Up Cap & 1/8 IP x 1"OD White Rubber Washer.
1/8 IP, Nickel Finish, Lock Up Kit, Secures A Center Mount Glass Shade To A Ceiling Fixture, Include 1 Each Of The Following: 1-1/8" Check Ring, 1/8 IP Lock Up Cap & 1/8 IP x 1"OD White Rubber Washer.