Departments
1500W, Submergible De-Icer With Guard, Made For Plastic Tanks & Maybe Used In All Tanks, Thermostatically Controlled To Operate Only When Necessary, Designed To Sit On The Bottom Of Tank, Protective Sturdy Guard, Designed To De-Ice Tanks Up To 300 Gallons, Will Keep Water Between 35-55 Degrees, Guaranteed For 1 Year.
40W, Egg Incubator, Easily Accommodates Up To 4 Dozen Eggs, Built In Hygrometer Measures Both Internal Temperature & Relative Humidity, Solid State Circuitry For Long Lasting & Reliable Temperature Setting, Red Indicator Light Shows When Heater Is Operating, Large Viewing Windows For Observation, Additional Probe Thermometer Included, Made With Recycled & Insulating Polystyrene.
Homeline, 20A, Single Pole, Combo Arc Fault Circuit Breaker, Provides Standard Overload & Short Circuit Protection, 1" Format For Use In Homeline Brand Load Centers, 120/240 Vac, 10,000 A.I.R., UL Listed, Meets 2008 National Electrical Code For Series & Parallel Arc Fault Protection.
12 Pack, 1/8" x 1-1/2", Cotter Pin, Also Known As Split Pin Or Cotter Key Or Extended Prong During Installation.
3 Pack, 1/4" x 2", Cotter Pin, Also Known As Split Pin Or Cotter Key Or Extended Prong During Installation.
4 Pack, 1/4" - 28 Straight Threaded Grease, Fitting For Cars, Trucks & A Variety Of Industrial Machines, Commonly Referred To As 1/4"-28 UNF-2A Grease Fittings Or 1/4"-28 UNF Parallel Threaded Grease Fittings.
3 Pack, 1/8 NPT, Straight Grease Fitting, Commonly Referred To As 1/8" NPT Zerk Fitting.
3 Pack,.148 x 3", Hitch Pin Clip, Fastener Used To Prevent A Wheel Or Other Rotating Part From Sliding Off The Axle Upon Which It Is Riding, Can Be Used As Cotter Pin Substitute, Commonly Used With Clevis Pins & Shafts, Insertion Into A Hole Depends On The Straight Leg Entering The Hole & The Curved Leg Pressing Down Upon OD Of The Shaft, Use When Connections Need To Be Disassembled, Secures On The Outside Of A Shaft Without The Need Of Drilled Holes.
2 Pack,.177 x 3-3/4", Hitch Pin Clip, Fastener Used To Prevent A Wheel Or Other Rotating Part From Sliding Off The Axle Upon Which It Is Riding, Can Be Used As Cotter Pin Substitute, Commonly Used With Clevis Pins & Shafts, Insertion Into A Hole Depends On The Straight Leg Entering The Hole & The Curved Leg Pressing Down Upon OD Of The Shaft, Use When Connections Need To Be Disassembled, Secures On The Outside Of A Shaft Without The Need Of Drilled Holes.
4 Pack, 1", 14 Gauge Narrow Rim Machine Bushing, Used To Reduce Vibrations.
3 Pack, 1-1/4", 14 Gauge Narrow Rim Machine Bushing, Used To Reduce Vibrations.
3 Pack, 3/16" x 1-1/2", Slotted Spring Pin, Headless Hollow Cylindrical Tubes Having A Longitudinal Slot Down The Entire Length With Chamfered Or Round Ends To Aid Installation, For Automation Assembly & High Performance Applications.
2 Pack, 3/8" x 2", Adjustable Clevis Pin, Multiple Holes, Cut Off Excess Length If Needed.
3/8" x 2", Orange Handle Detent Pin, Easy To Insert & Remove, Hi-Visibility Bright Orange Plastisol Easy Grip Handle, Features Stainless Steel Ball Locking Mechanism In Place Of Hitch Pin Clip Or Other Fastener.
5/8" x 3", Orange Handle Detent Pin, Easy To Insert & Remove, Hi-Visibility Bright Orange Plastisol Easy Grip Handle, Features Stainless Steel Ball Locking Mechanism In Place Of Hitch Pin Clip Or Other Fastener.