Departments
Amber Rotating Beacon, With A 12V DC X 12' Long Cord That Plugs Into The Cigarette Lighter Of Any Vehicle, A Magnetic Base That Can Stick To Any Magnetic Material, Base Has A Scratch Resistant Pad Over The Magnetic Surface, Used To Warn Drivers Of Snow Plowing Operations Or Other Roadside Operations.
4-1/2", Square, LED Stop, Tail, Turn Light, Without The License Plate Illumination Light, For Right Side Of Trailer, Curb Side, Stud Mounted Light With Studs At 2" Centers, No Special Wiring Required To Install This Light, A Replacement For Either An Incandescent Light Or LED OEM Style Light.
3-1/4" x 1", Amber, Trailer Marker Light, With White Mounting Base, Used On 12 V DC Vehicle Circuits Only.
2-3/4" x 2-1/8", Amber, Incandescent Trailer Clearance Light, Used To Identify That A Trailer Is Present, Stud Mounted, Light Is Grounded Through The Stud & Has A 1 Wire Electrical Connection To The Hot Wire Only.
4-1/8" x 2", Amber, Incandescent Marker Light, Used For Mounting On Trailers As A Side Marker Light To Identify That A Trailer Is Present As Required By The DOT.
2-3/4" x 3/4", Amber LED, Trailer Marker Light, Is A 2 Wire Application, Comes With The Chrome Cover.
1-1/2", Laminated Padlock, 4 Pin Tumbler, 3/4" Shackle, 9/32" Shackle Diameter, Uses Master Lock Key Blank K1BOX Or Ilco Blank M1 TV #320-952, Carded.
4-1/2", Square, LED Stop, Tail, Turn Light, For Trailers Under 80" Wide, With A License Illumination Light, Left Side Of Trailer, Street Side, Stud Mounted Light With Studs At The Standard 2" Between Centers, No Special Wiring Is Necessary To Install This Light, A Replacement Light For An Led Or Incandescent Light.
LED Submersible Trailer Light Kit, For Trailers Under 80" Wide, Includes A Right & Left Stop, Tail & Turn Light, License Plate Bracket, 25' Y Trailer Wire Harness & All Hardware For Installation, No Special Wiring Required To Replace Incandescent Trailer Lights With LED Lights.
2", Laminated Padlock, 4 Pin Tumbler, 1" Shackle, 3/8" Shackle Diameter, Uses Master Lock Key Blank K1BOX Or Ilco Blank M1 TV #320-952, Carded.
4 OZ, Blue, Lava PVC Cement, Medium Bodied Blue Cement For Use On All Schedules & Classes Of PVC Pipe & Fittings Up To 6" Diameter With Interference Fit, Very Fast Setting Hot Cement Formulated For Wet Conditions &/Or Quick Pressurization & Fast Installation, Recommended For Potable Water, Sewer & DWV Applications, Application Temperature 40 Degrees Fahrenheit To 110 Degrees Fahrenheit, 4 Degrees Celsius To 43 Degrees Celsius, No Primer Needed On Non-Pressure DWV, Where Local Codes Permit, Low VOC Solvent Cement Meets California South Coast Air Quality Management District SCAQMD 1168/316A Or BAAQMD Method 40 & Various Environmental Requirements.
8 OZ, Blue, Lava PVC Cement, Medium Bodied Blue Cement For Use On All Schedules & Classes Of PVC Pipe & Fittings Up To 6" Diameter With Interference Fit, Very Fast Setting Hot Cement Formulated For Wet Conditions &/Or Quick Pressurization & Fast Installation, Recommended For Potable Water, Sewer & DWV Applications, Application Temperature 40 Degrees Fahrenheit To 110 Degrees Fahrenheit, 4 Degrees Celsius To 43 Degrees Celsius, No Primer Needed On Non-Pressure DWV, Where Local Codes Permit, Low VOC Solvent Cement Meets California South Coast Air Quality Management District SCAQMD 1168/316A Or BAAQMD Method 40 & Various Environmental Requirements.
Gallon, Mold Killing Primer Gallon, Kills Existing Mold, Mildew & Odor Causing Bacteria, Paint Directly Over Mold, EPA Registered, Excellent Adhesion & Hide, Interior/Exterior, Fast 1 Hour Dry Time.
QT, Mold Killing Primer Gallon, Kills Existing Mold, Mildew & Odor Causing Bacteria, Paint Directly Over Mold, EPA Registered, Excellent Adhesion & Hide, Interior/Exterior, Fast 1 Hour Dry Time.
1-1/2", Warded Steel Laminated Padlock, 5/8" Shackle, 1/4" Shackle Diameter, Carded, Uses Key Blank K22RBOX Or Ilco 1286BR.